using loading release and alignment error pre-compensation method”, Microelectronic Engineering, Vol 85/1, 2008，pp 168-174 　　 Jinyou Shao, Hongzhong Liu, Yucheng Ding, Li Wang, et al. “Alignment measurement method for imprint lithography using moiré fringe pattern”, Optical Engineering, vol 47/11, 2008, 113601 　　 Weitao Jiang, Yucheng Ding, Hongzhong Liu, et al. “Two-Step curing method for demoulding in UV nanoimprint lithography”, Microelectronic Engineering, Vol 85/2, 2008, pp 458-464 　　 Hongbo Lan, Yucheng Ding, Hongzhong Liu, et al, “Mold deformation in soft UV-nanoimprint lithography”, Sci China Ser E-Tech Sci, Vol.39/1,2009, pp1-10 　　 Hongzhong Liu, Yucheng Ding, et al. “Study of Carbon Nano-Tube Photo-electronic Devices by Nano Imprint lithography”, IEEE conference, 2007, vol 8/7, 274-275. 　　 Lei Yin, Hongzhong Liu, Yucheng Ding, Bingheng Lu “Fabrication of 3D micro-structures in polymer photovoltaic devices based on soft nanoimprint lithography technology”, IEEE conference, 2007,vol 8/7, 300-301. 　　 Yongsheng Shi, Hongzhong Liu, Yucheng Ding, Bingheng Lu, “Fabrication of highly ordered pore arrays by soft nanoimprint lithography”, IEEE conference, 2007, vol 8/7, 280-281. 　　 Hongzhong Liu, Yucheng Ding, Weitao Jiang, et.al “A novel loading and demoulding process control in UV nanoimprint lithography”, Microelectronic Engineering, 2008, in press, available online. 　　 Jinyou Shao, Yucheng Ding, Hong Zhong Liu, et al. “Strategy for loading force induced overlay position shift in step imprint lithography”, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 2008, accepted, in press 　　 Lei Yin, Hongzhong Liu, Yucheng Ding, et al. “Fabrication of carbon nanotube arrays for field emission and sensor devices”, Microelectronics Journal, 2008, accepted, in press, available online 　　 Quandai Wang,Yugang Duan, Yucheng Ding et al.“Investigation on LIGA-like process based on multilevel imprint lithography”, Microelectronics Journal, 2008, accepted in press, available online. 　　 Xiangdong Ye, Yucheng Ding, Hansong Li et al. “Research on the cast molding process for high quality PDMS molds”, Microelectronic Engineering, 2008, in press, available online. 　　 Hongbo Lan, Yucheng Ding, et al. “Price quotation methodology for stereolithography parts based on STL model”, Computers & Industrial Engineering, 52/2 (2007), pp.241–256 　　 Hongbo Lan, Yucheng Ding, et al. “A re-configurable cross-sectional imaging system for reverse engineering based on a CNC milling machine”，Int J Adv Manuf Technol (2008) 37:341–353 　　 Hongbo Lan, Yucheng. Ding, Jun Hong, et al. “Decision support system for rapid prototyping process selection through integration of fuzzy synthetic evaluation and expert system”, Int. J. of Production Research, 42/1(2005), pp.169-194 　　 Hongbo Lan, Yucheng Ding, Jun Hong, et al. “A web-based manufacturing service system for rapid product development”, Computers in Industry, 54/1(2004), pp.51-67 　　 Zhengyu Zhang, Yucheng Ding, Jun Hong, et al. “A New Hollowing Process for Rapid Prototype Models”, J. of Rapid Prototyping, 10/3(2004), pp.166-175 　　 Yucheng Ding, Hongbo Lan, Jun Hong et al. “An integrated manufacturing system for rapid tooling based on rapid prototyping”, Robotics and Computer Integrated Manufacture, 20/4(2004), pp.281-288 　　�