gs Technology, 202: 2775?C2782 （2008) （SCI&EI). 　　4.Ren, Y. Wang, C. and Qiu, Y. Aging of Surface Properties of Ultra High Modulus Polyethylene Fibers Treated with He/O2 Atmospheric Pressure Plasma Jet, Surface & Coatings Technology, 202: 2670?C2676 （2008) （SCI&EI). 　　5.Wang, C. Liu Y. Xu, H.L. Ren, Y., and Qiu, Y. Influence of atmospheric pressure plasma treatment time on penetration depth of Surface modification into fabric, Applied Surface Science. 254:2499?C2505 （2008) （SCI&EI). 　　6.Wang, T., Wang, C. and Qiu, Y. Surface modification of ultra high modulus polyethylene fibers by an atmospheric pressure plasma jet, Journal of Applied Polymer Science, 108:25-33 （2008) （SCI&EI) 7.Zhu, L., Teng, W., Xu, H., Liu, Y., Jiang, Q., Qiu, Y. Effect of Absorbed Moisture on the Atmospheric Plasma Etching of Polyamide Fibers，Surface and Coatings Technology, 202: 1966-1974 （2008) （SCI&EI) 　　8.Wang, X., Hu, B., Feng, Y., Liang, F., Mo, J., and Qiu, Y. Low Velocity Impact Properties of 3D Woven Basalt/Aramid Hybrid Composites,Composites Science and Technology. 68: 444-450 （2008) （SCI&EI). 　　9.Wang, C., Zhu, L. and Qiu, Y. Laser scanning confocal microscope characterization of dye diffusion in nylon 6 fibers treated with atmospheric pressure plasmas, Journal of Applied Polymer Science, 107: 1471-1478 （2008) （SCI&EI) 　　10.Cai，Z. and Qiu, Y. Effect on the anti-felt properties of atmospheric pressure plasma treated wool. Journal of Applied Polymer Science, 107: 1142-1146 （2008) （SCI&EI) 　　11.Ji, C., Sun, B., Qiu, Y., Gu, B. Impact damage of 3D orthogonal woven composite circular plates. Applied Composite Materials. 14:243-262 （2007) （SCI&EI) 　　12.Wang C., Lv, X., Liu, Y., Ge, L., Ren, Y. and Qiu Y., Influence of temperature and relative humidity on aging of atmospheric plasma jet treatment effect on ultrahigh-modulus polyethylene fibers, Journal of Adhesion Science and Technology. 21: 1513-1527（2007) （SCI&EI) 　　13.Wang, C., Ren, Y., Qiu, Y. Penetration depth of Surface modification into multiple polyester fabrics, Surface and Coatings Technology, 202: 77?C83 （2007) （SCI&EI) 　　14.Ren, Y., Wang, C. and Qiu Y. Influence of Aramid Fiber Moisture Regain during Atmospheric Pressure Plasma Treatment on Aging Behavior of the Treatment Effects. Applied